| Quantity: | |
|---|---|
SNBL-75/90
SINOTECH
84778000
Semi Automatic PVC Pipe Bending Machine
Application
Semi-auto Plastic PVC Pipe Bending Machine On the basis of internation advanced technology from the developed countries, we produced the PVC pipe bending machine independently. This machine can be used to replace traditional PVC fitting injection machines. And this machine can save cost about 50% than injection machines. We aim to make high quality machines with reasonable price.
This machine can bend the pipes at the same time of making socket.
Function
- Bend PVC pipes.
- Bend and socketing PVC pipe in one end.
- Bend and socketing PVC pipes in both ends
Main advantages:
- PERFECT ROUNDNESS of the entire bend;
- HIGH OUTPUT;
- Length, angle and radius of the bends are variable;
- High level of technology;
- User-friendly machine;
- Reliability, efficiency, low maintenance;
- Compact machine - small size.
Technical parameter:
| Pipe standards | Model | SNBL-75/90 |
| Standard | U-PVC1002.1-2006 (as request) | |
| Diameter | 4inches 6 inches | |
| Length | According to customer’s requirements | |
| Electrical component | Iow-voltage apparatus | Schneider, Omron |
| Use voltage | 380V, 60HZ, 3-phase (as request) | |
| Pneumatic | Compressed air pressure | 0.6-0.8MPA |
| Pneumatic cylinder | Airtac | |
| Pneumatic valve | Airtac (Taiwan brand) | |
| Oil-water separator | Airtac | |
| Quantity of air bag/collection | 1pcs | |
| Hydraulic | Hydraulic pressure | 6.3-8.0MPA |
| Quantity of hydraulic station | 1pcs | |
| Hydraulic oil | LHM-46, about 40 litre*2=80L | |
| Solenoid valve | OLK Zhejiang | |
| Hydraulic valve | Yuken | |
| Hydraulic oil pump | Yuken | |
| Oil pump motor power | 4.0kw | |
| Oil cylinder | SNS | |
| Chiller for oil tank | 1pc | |
| Equipment appearance | Machine type | Semi-Automatic, one pipes per cycle |
| Center height | 1000mm (as request) | |
| Machine color | Light grey (as request) | |
| Operating principle | Bend | With air pressure chamber and collapsibel mandrel |
| Cooling type | Air-cooling | |
| Machine speed | 30-40pcs/hr for OD60mm&89mm pipe | |
| Mould material | Socket mold: 45＃steel with Cr electroplating | |
| Bend mold: Aluminum. |
FAQ
Q: How about your after-sale service ?
We offer manual instruction and engineer training before loading,after shipment we provide 24 HRS online support, video technical support or field installation assist.
Q: What is the lead time?
For customized machine, it takes about 45-60 days after deposit. For stock machine, fast shipment. ( The actual production cycle will vary according to the degree of customization.)
Q: What is the warranty period for your machine ?
12 months warranty for components and technical support .
Q: Do you provide custom machines?
Most of our machines are customized. Our goal is efficiency and stable performance. We design the machines according to customers products to meet customer's needs.
Q: How can we install the machine when it arrives?
We can send experienced technicians to customer's country for guiding the installation and commission the machine, also train the customer's employees.
Q: What's the advantage of SINOTECH?
We provide customers with turnkey projects. Including plant design, plastic machine and mold installation, debugging, also we can source the auxiliary equipments for customers. We can ship the full set of machines after testing in our factory. It will save a lot of cost and time.
Semi Automatic PVC Pipe Bending Machine
Application
Semi-auto Plastic PVC Pipe Bending Machine On the basis of internation advanced technology from the developed countries, we produced the PVC pipe bending machine independently. This machine can be used to replace traditional PVC fitting injection machines. And this machine can save cost about 50% than injection machines. We aim to make high quality machines with reasonable price.
This machine can bend the pipes at the same time of making socket.
Function
- Bend PVC pipes.
- Bend and socketing PVC pipe in one end.
- Bend and socketing PVC pipes in both ends
Main advantages:
- PERFECT ROUNDNESS of the entire bend;
- HIGH OUTPUT;
- Length, angle and radius of the bends are variable;
- High level of technology;
- User-friendly machine;
- Reliability, efficiency, low maintenance;
- Compact machine - small size.
Technical parameter:
| Pipe standards | Model | SNBL-75/90 |
| Standard | U-PVC1002.1-2006 (as request) | |
| Diameter | 4inches 6 inches | |
| Length | According to customer’s requirements | |
| Electrical component | Iow-voltage apparatus | Schneider, Omron |
| Use voltage | 380V, 60HZ, 3-phase (as request) | |
| Pneumatic | Compressed air pressure | 0.6-0.8MPA |
| Pneumatic cylinder | Airtac | |
| Pneumatic valve | Airtac (Taiwan brand) | |
| Oil-water separator | Airtac | |
| Quantity of air bag/collection | 1pcs | |
| Hydraulic | Hydraulic pressure | 6.3-8.0MPA |
| Quantity of hydraulic station | 1pcs | |
| Hydraulic oil | LHM-46, about 40 litre*2=80L | |
| Solenoid valve | OLK Zhejiang | |
| Hydraulic valve | Yuken | |
| Hydraulic oil pump | Yuken | |
| Oil pump motor power | 4.0kw | |
| Oil cylinder | SNS | |
| Chiller for oil tank | 1pc | |
| Equipment appearance | Machine type | Semi-Automatic, one pipes per cycle |
| Center height | 1000mm (as request) | |
| Machine color | Light grey (as request) | |
| Operating principle | Bend | With air pressure chamber and collapsibel mandrel |
| Cooling type | Air-cooling | |
| Machine speed | 30-40pcs/hr for OD60mm&89mm pipe | |
| Mould material | Socket mold: 45＃steel with Cr electroplating | |
| Bend mold: Aluminum. |
FAQ
Q: How about your after-sale service ?
We offer manual instruction and engineer training before loading,after shipment we provide 24 HRS online support, video technical support or field installation assist.
Q: What is the lead time?
For customized machine, it takes about 45-60 days after deposit. For stock machine, fast shipment. ( The actual production cycle will vary according to the degree of customization.)
Q: What is the warranty period for your machine ?
12 months warranty for components and technical support .
Q: Do you provide custom machines?
Most of our machines are customized. Our goal is efficiency and stable performance. We design the machines according to customers products to meet customer's needs.
Q: How can we install the machine when it arrives?
We can send experienced technicians to customer's country for guiding the installation and commission the machine, also train the customer's employees.
Q: What's the advantage of SINOTECH?
We provide customers with turnkey projects. Including plant design, plastic machine and mold installation, debugging, also we can source the auxiliary equipments for customers. We can ship the full set of machines after testing in our factory. It will save a lot of cost and time.
